Low Voltage Control Systems - SystemAir Fantech SHR 150R Manuel D'installation Et D'utilisation

Low Voltage Control Systems

* Please see instruction manuals for individual controls for proper wiring and set up of control systems.
CENTRAL CONTROLS
These cannot be used with another central control
CONTROLS
ECO-Touch® • Our most complete, yet easy to use control system
• Sleek design with backlight touchscreen LCD
• ECO mode selects the best operating mode and speed for the season,
minimizing energy use associated with ventilation
• Set preferred indoor relative humidity range and ventilation mode for day
and night conditions
• No battery to replace, all programmed settings are retained during power
outage
• Maintenance reminder indicator
• Error code messages reduce troubleshooting time
• MODE button provides 3 modes of operations: Ventilation , Recircula-
EDF7
tion and Standby
• User selected fan speed: Reduced, Medium, Normal and 20 minutes
per hour
• AUTO setting allows the homeowner to deactivate the dehumidistat
• When the humidity exceeds the desired setpoint, the ventilation sys-
tem operates at Normal speed.
• Once the desired humidity level is achieved, your ventilation system
resumes to its previous mode of operation
EDF1 / EDF 1R • Press button once for continuous Reduced speed
• Press button twice and the unit will cycle 20 minutes ON/ 40 minutes
OFF and repeat
• EDF1 – Press button a third time and the system will run continuously
on HIGH speed
• EDF1R –Press button a third time and the system will run recirculation
on HIGH speed
AUXILIARY CONTROL – These controls can be paired with central controls or combined together.
• 20- minute timer with LED light
RTS2*
• Boosts system to high speed with the touch of a button
• Up to 5 can be used in one system
• Use in bathroom, kitchen, laundry room
5
• 20/40/60 minute timer with LED light
RTS
• Boosts system to high speed with the touch of a button
• Up to 5 can be used in one system
• Use in bathroom, kitchen, laundry room
MDEH1 • Rotary dial Dehumidistat
• Multiple units can be used
• We recommend setting the relative humidity above 80% during the summer
FEATURES
1. Ensure that unit is not
CONNECT TO
plugged when connecting
the control
2. Recirculation mode is only
available with the "R" suffix
W
at the end of the model
W
number.
W
W
The wiring connectors
W
W
+T
-T
+T
-T
D
D
13
can be removed for
easier connection.
*Maintain polarity
between control
and HRV
(+ → + ; - → -)