Section 3 − Installation; Specifications For Spool Gun 3035; Specifications For Spool Gun 3545; Components Supplied With Spool Gun Conversion Kit - Hobart Welders 3035-20 Manuel D'utilisation

3-1. Specifications For Spool Gun 3035-20

Approximate
Wire Diameter Range Wire Feed
.030 Thru .035 in
(0.8 Thru 0.9 mm)
Aluminum Wire 115 To 715 ipm
(4.1 To 20.4
.023 Thru 035 in
(0.6 Thru 0.9 mm)
Hard Or Cored Wire

3-2. Specifications For Spool Gun 3545-20

Approximate
Wire Feed
Wire Diameter Range
.030 Thru .047 in
(0.8 Thru 1.2 mm)
Aluminum Wire 200 To 1200 ipm
(5.1 To 30.5
.030 Thru .047 in
(0.8 Thru 1.2 mm)
Hard Or Cored Wire
NOTE

3-3. Components Supplied With Spool Gun Conversion Kit

Gas Diverter Valve
SECTION 3 − INSTALLATION
Cooling Maximum Spool
Method
Range
Air Cooled
mpm)
Cooling Maximum Spool
Method
Range
Air Cooled
mpm)
Installing a spool gun on the IronMan 210 or IronMan 250 requires installing a
Spool Gun Conversion kit consisting of a toggle switch assembly and gas diverter
valve (see Section 3-3).
Installing a spool gun on the IronMan 250 (Eff w/Serial No. LA135884) requires
this kit consisting of a toggle switch assembly and gas diverter valve.
Installing a spool gun on the IronMan 250 prior to Serial No. LA135884 requires
ordering an SGA 100 control.
The SGA 100 or 100C spool gun adapter control is needed for installation on other
MIG or engine driven welding power sources.
Weld Circuit
Size Rating
100 Volts, 150
Amperes, 60%
4 in (102 mm)
Duty Cycle
Diameter
Using Argon
Shielding Gas
Weld Circuit
Size Rating
100 Volts, 200
Amperes, 60%
4 in (102 mm)
Duty Cycle
Diameter
Using Argon
Shielding Gas
Spool Gun Toggle Switch Assembly
Overall
Weight
Dimensions
Length:
11-1/2 in (291 mm)
Width:
9.1 lb (4.1 kg)
2-1/4 in (57 mm)
Gun With Cable
Height:
8 in (203 mm)
Overall
Weight
Dimensions
Length:
11-1/2 in (291 mm)
Width:
10 lb (4.5 kg)
2-1/4 in (57 mm)
Gun With Cable
Height:
8 in (203 mm)
Ref. 801 890-A / Ref. 801 890-A
OM-226 857 Page 9