Downloading The Aura Tm Camera Database - Snooper TRUCKMATE S7000 Mode D'emploi

NOTE: The Truckmate Updater software does not support Windows 95, 98, Millennium or
Apple Macintosh operating systems. Windows XP (64bit) systems is not supported.
Software Installation Instructions
Place the Software CD into a CD ROM or DVD drive. Your PC should automatically open
a window displaying the instructions for installing the software. Follow the instructions
onscreen to install the download software.
To launch the CD manually: Click on 'Start' and then 'Run' . In the dialogue box that opens
click on 'Browse' – another dialogue box will open. Locate your CD ROM or DVD drive
(drive letter is normally D) using the 'Look in' option and select 'Autorun' from the lower
portion of the dialogue box. Once you have selected 'Autorun' click on 'Open' on the
explorer box and then 'OK' on the Run dialogue box.
Please make sure that the operating system installs the new hardware before
installing The Truckmate Updater software. YOU WILL NEED TO START THE UPDATER
SOFTWARE MANUALLY THE FIRST TIME YOU USE IT. CLICK 'START' , 'ALL PROGRAMS'
THEN 'TRUCKMATE UPDATER' .
Any later software updates can be obtained from www.snooperneo.co.uk. If you have any
problems using this software please call 0870 787 0700 during office hours and select
Option 3.
Once the software is installed, you are ready to download the database onto
Truckmate. The Truckmate Updater software runs automatically in the background.
This is indicated by the
clock.
Downloading the AURA
Please Note: You must register Truckmate before you can perform a download.
Performing a download is simple.
1. Connect the AC Power adapter provided to a mains plug socket and attach the other
end to Truckmate in the power socket.
symbol, located in the system tray near the system
TM
22 • UK
Camera Database