System Requirements And Software Installation - Snooper TRUCKMATE S7000 Mode D'emploi

NB. It is important that you do not lose or forget this code. If you forget this code you will
need to return your Truckmate so that the unit can be reset.
Configuration Security Code
It is also possible to protect the configuration settings using a security pin code. To
activate the security code press the centre of the display to access the Menu, then press
the 'Configure' button, press the black arrow twice and then press the 'Configuration
Security Code' icon. Select 'Yes' to switch the function on. Press the 'Enter Code' button
and enter the 4 digit code that you would like to use to protect the configuration settings
and press 'OK' . Once this setting has been activated you will need to enter this code each
time you want to amend the configuration settings on your Truckmate.
NB. It is important that you do not lose or forget this code. If you forget this code you will
need to return your Truckmate so that the unit can be reset.
Register your Truckmate on-line and gain access to Snooper's comprehensive
database of speed trap positions across Europe. Register now at www.snooperneo.
co.uk
.

System Requirements and Software Installation

Before you can begin to download the database onto the Truckmate, you will need to
install the Truckmate Updater software provided on the CD ROM.
In order for the software to be installed successfully, there are certain minimum hardware
and software requirements needed.
Hardware Requirements
The computer must have an Intel Pentium Class processor or equivalent, a minimum of
32MB of RAM, a monitor with 256 (8-bit) colours or greater, a CD ROM drive, 20MB of free
disc space and a spare USB connection
Software Requirements
The software will only operate on the following Windows based operating systems:
Windows 2000, Windows XP (32bit), Windows Vista and Windows 7, in addition, will only
work with Internet Explorer 6 or Netscape Navigator 6 or above.
21 • UK