Main Menu; Steering Wheel Control (Oe Mode, Ir-Stalk-Interface) - XZENT X-127 Manuel De L'utilisateur

MAIN MENU

1
MAIN MENU operation buttons and display
A Time and date.
B Page indicator.
1. Source Icon Press to open selected source.
To browse the different source icons, swipe left or right. Alternatively you can press the arrow keys
to browse the different pages.
To return to this screen you can press the HOME front sensor key or the return arrow button in top
left corner of every source.
8
A
B
STEERING WHEEL CONTROL
The XZENT device is pre-confi gured to work with an IR-Stalk-Interface which is NOT included in the set.
Alternatively an existing analogue steering wheel control can be connected to XZENT Analogue Key
interface (Key1 / Key2 / GND).
X-127 has 2 different modes, MODE-2 (default for high ohms values) or MODE-1 (for low ohms values)
to support different ohms ranges. The ohms ranges of each mode cannot be mixed to support SWC that
have both mixed low and high ohms values.
MODE 2 (HIGH OHM BASED):
1
2
A1
3
A
Operation buttons:
1. Skip next: this button follows the Graphical User Interface (GUI) function of
the active audio source.
2. CAM/voice: press to activate CAM source. Press again to close CAM source.
Press & hold to activate CarPlay or Google Andorid Auto voice control.
3. Skip last: this button follows the Graphical User Interface (GUI) function of
the active audio source.
4 . Vol+: press to increase active audio volume level.
5. Mute/Pickup/hangup: While no active call, press to MUTE or unmute all audio. During incoming
call (ringing), press to pick up call. While active call, press to end call.
6. Vol-: press to decrease active audio volume level.
A: You can customize the buttons of your SWC to your preference by placing standard or alternative
buttons to your SWC. The process is explained at the end of this chapter.
Alternative buttons:
Each mode has different alternative buttons for assignment.
A1. Alternative function SRC or SRC/Voice: Press to select a different Source via Main Menu highlighting.
or press and hold to activate CarPlay or Google Andorid Auto voice control.
A2. Alternative function FAV or NAV/voice: Press to invoke the assigned FAV function from Setup or
press to start native navigation (not for X-127), press and hold to activate CarPlay or Google Andorid
Auto voice control.
B: This button will reset any custom confi guration on the SWC back to factory settings.
(OE MODE, IR-STALK-INTERFACE)
4
5
6
A2
B
9