Tools Needed - Blackstone 1891 Manuel D'utilisation

Model 1891 | Owner's Manual | Assembly Guide
!
WA R N I N G
The manufacturer has made
every effort to eliminate any
sharp edges. However, you ASSEMBLY INSTRUCTIONS
should handle all compo-
Please read all instructions thoroughly before proceeding. Make sure all
nents with care to avoid
the plastic packing material is removed before assembling
accidental injury.
Find a large, clean area to assemble your griddle. Please refer to the parts list
Some parts may contain
and assembly diagrams as necessary.
sharp edges, especially
as noted in these instruc-
Griddle assembly involves large components; therefore, it is advised to
tions. Wear protective
have two people assemble the unit.
gloves if necessary.
!
WA R N I N G
The use of alcohol, prescrip-
S T E P 0 1
tion or non-prescription
drugs may impair the
smooth flat surface and attach the
consumer's ability to prop-
four (4) griddle feet and the four(4)
erly assemble or safely
M8 flange nuts to the bottom of
operate the appliance.
the griddle in the pre-threaded
holes. Ensure that the fuel nozzle is
!
C A U T I O N
housed within the burner opening.
Two people are recom-
mended for the assembly
of this product.
S T E P 0 2
stand from the packaging and open
the stand legs. Once the legs are
fully open, the locking pins will
engage. (To close the legs, pull on
the locking pins to disengage them.)
S T E P 0 3
desired height and turn the thumb-
screws to tighten.
08
Place griddle on a
Remove the griddle
Adjust the legs to
S T E P 0 4
Attach the side shelf by sliding the tear-shaped holes over the
pre-inserted screws on the right side of the griddle stand. Push the shelf
down to lock it into place.
S T E P 0 5
Place the griddle on the stand. The four (4) feet on the bottom of
the griddle will line up with the corresponding holes for secure placement.
Assembly Guide | Owner's Manual | Model 1891
TOOLS NEEDED: Phillips Head
Screwdriver & Adjustable Wrench
09