Pc Interface; Data Transfer - Siemens Gigaset SL1 Mode D'emploi

Appendix

PC Interface

You can connect the SL 1 handset to your PC with a Siemens data cable. Your PC can now
communicate with your SL 1 by means of the "Siemens Data Suite" software
(downloaded free from http:\\www.my-siemens.com\gigaset-sds) and access the
following handset parameters and lists:
Read parameters
Software version
◆
Type
◆
Manufacturer's code
◆
Read/write access to
The telephone directory
◆
The email directory
◆
The network provider list
◆
The appointments list
◆
The last number redial list
◆
Read/write access to other parameters
Ringer settings
◆
Volume settings
◆
Load screensavers
◆
Load melodies
◆
Make and answer telephone calls
◆

Data transfer

With some functions, large amounts of data are transferred between the handset and
the external device (PC). In this case the handset switches to data transfer mode, and
Data Transfer appears in the handset display. When the handset is in this mode you
cannot make any inputs on the keypad, and incoming calls are ignored.
The handset goes into data transfer mode in the following cases:
Read/write access to the telephone directory
◆
Read/write access to the email directory
◆
Read/write access to the network provider list
◆
Read/write access to the appointments list
◆
Read/write access to the last number redial list
◆
Load screensavers
◆
Load melodies
◆
The handset returns to idle status automatically if any errors occur during data transfer.
Make and answer telephone calls
If you dial a number from the external device or answer a call from it, the handset will
behave exactly as if you carried out these functions on the handset.
28