Siemens Gigaset SL1 Mode D'emploi page 54

Activating/deactivating the Walk and Talk mode
v (open menu); s
To deactivate: press the display key
Press c (Talk key) or d (handsfree key) The call will go to all handsets that are in Walk
and Talk mode. The loudspeaker volume and the advisory tones are set in exactly the
same way as if your handsets were in range of the base (page 22). The ringers cannot
be set in Walk and Talk mode.
The ringer (page 23) and keypad lock (page 8) can be activated/deactivated in the Walk
and Talk mode.
To open the menu, press the display key ©.
The Walk and Talk mode is retained even when you switch your handset
i
off and back on.
Using a handset in Walk and Talk mode as a room monitor
à (open menu); s
s (to the next line); select r (Low or High);
The room monitor will only call handsets that are in the Walk and Talk mode.
Always check the settings of the room monitor before you leave
W
home, e.g. sensitivity and phone line. The distance between the
handsets should not now be changed (range).
Press the display key
The handset returns to the normal Walk and Talk mode.
OK
Add. Features
.
Off
OK
Room Monitor
on the room monitor handset to deactivate the room monitor.
Off
; s
OK
Walk and Talk
; r (select On);
.
Save
Using several handsets
.
21