Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 38
> Before Start
> Part Names

∫ Network function

0 If you cannot select a network service, it will become
selectable when the network function is started.
0 Try plugging/unplugging the power supply of this unit and
the router, and try rebooting the router.
Cannot access the Internet radio
0 Certain network service or contents available through the
unit may not be accessible in case the service provider
terminates its service.
0 Make sure that your modem and router are properly
connected, and make sure they are both turned on.
0 Depending on ISP, setting the proxy server is necessary.
0 Make sure that the used router and/or modem is
supported by your ISP.
Cannot access the network server
0 This unit needs to be connected to the same router as
the network server.
0 This unit is compatible with Windows Media
12 network servers or NAS that are compatible with
home network functionality. Furthermore, when using a
PC, only music files registered in the Windows Media
Player library can be played.
Playback stops while listening to music files on the
network server
0 When the PC is serving as the network server, try quitting
any application software other than the server software
®
(Windows Media
Player 12, etc.).
0 If the PC is downloading or copying large files, the
playback may be interrupted.
The album names and artist names for the Music Server
are not displayed
0 Meta data, such as album names and artist names,
needs to be recognized on the server for distribution to
this unit, so this depends on the specifications of the NAS
or server you are using.
> Install
> Initial Setup
0 The file formats supported depend on the NAS or server
software. For details, contact the manufacturer of NAS or
the server software.
Album art in Music Server is displayed sometimes but
not other times
0 Music Server depends on the specifications of the server
software.
0 The formats supported depend on the server software.
0 For details, contact the manufacturer of the server
software.
∫ Saving and deleting the music on a USB
HDD connected to this unit from a computer
When an HDD formatted with this unit is connected to a
computer, the files are not shown or cannot be read or
written by the computer
0 As the HDD formatted by this unit is formatted with a
®
Player 11 or
special format, it will not be possible to view or read/write
files even when connected to a computer (Windows or
Macintosh).
®
This unit is not displayed in the list of network
connected devices on the computer
0 When this unit is on, you cannot use a computer to
access the HDD connected to the USB port on the rear of
the main unit. You need to first set "Network Standby" to
"On (USB Power)", then switch this unit to standby. In the
Setup menu select "Option Setting" - "Power Off Setting"
- "Network Standby", then select "On (USB Power)" and
press ENTER, and finally press Í STANDBY/ON on the
remote controller to switch this unit to standby.
∫ D/A converter feature
0 Make sure that the devices are properly connected.
0 Play audio compatible with the input jacks on this unit.
> Playback
Supplementary information | Advanced Setup |
(
P23)
Cannot play audio from computers
0 Cancel the muting on your computer.
0 Select this unit in the audio output settings on your
computer. If this unit's input is set to anything other than
"USB DAC In", the computer will not detect this unit.
0 To play the audio from a computer, you need to install the
special driver on your computer. Download the driver
software from our website.
http://www.pioneer-audiovisual.eu/
0 If there are multiple applications running on the
computer, shut down those applications that you are not
using.
Sampling frequency is always the same through the
USB DAC In input
0 Depending on the computer settings, even if the
sampling frequencies of the files being played are
different, they are converted to the same sampling
frequency for output.
Computer sounds other than music are heard through
the USB DAC In input
0 Depending on the settings on the computer, sounds such
as the computer startup tone or error sounds may be
played through this unit.
Others
E
N
33

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

N-50ae

Table des Matières