Using This Unit As A D/A Converter; Playing Back - Pioneer N-70AE Manuel D'instructions

> Before Start > Part Names

Using this unit as a D/A converter

1
a
b
c
a USB Cable, b Digital Optical Cable, c Digital Coaxial Cable
22
> Install > Initial Setup
2
> Playback
Supplementary information | Advanced Setup | Others
You can convert the digital audio from computers and audio
devices such as CD players to analog, then output them
from the ANALOG OUT jacks.
To play the audio from a computer, you need to install the
special driver on your computer. Download the driver
software from our website.
http://www.pioneer-audiovisual.eu/
Connections
Use an A—B type USB cable to connect a computer. Use
either a digital optical cable or digital coaxial cable,
depending on the jacks on the device to be connected, to
connect audio devices such as CD players.

Playing Back

1. Turn the unit on.
2. When playing a computer connected to the USB DAC
port, press USB DAC IN to change the input on this unit
to "USB DAC In".
USB DAC In
E
N