Samsung DW60R2014 Serie Mode D'emploi page 14

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Setting up your dishwasher
DW60R2014AP
01 POWER
02 Cycles
03 Half Load
04 Sanitize
05 Hi-Temp Wash
06 Control Lock
(3sec)
07 Indicator
14
English
DW60R2014(A5)_IB_DD81-02706A-00_EN.indd 14
When you press the POWER button, the entire display turns on and
off. When the selected cycle is complete, the dishwasher powers
off automatically.
Select the appropriate wash cycle depending on the soil level of
your dishes.
For small amount of loading items, press the Half Load button to
save energy.
The temperature rises to 163 ˚F (73 ˚C) in the final rinse cycle for
high temperature sanitization. If you select the Sanitize option,
the "Sanitize" lamp blinks when the water temperature reaches
the sanitary temperature [over 156 ˚F (69 ˚C)], and then remains
illuminated until the Sanitize option ends. When you press the
POWER button, the "Sanitize" lamp turns off.
NOTE
• The Normal cycle with the Sanitize option selected is NSF
certified.
• The Sanitize feature operates in accordance with NSF/ANSI
Standard 184 for residential diShwashers. Certified residential
dishwashers are not intended for licensed food establishments.
Raises the main wash temperature to improve cleaning for loads
containing tough, baked-on food.
NOTE
Hi-Temp Wash is not available for the Express 60 cycle.
Control Lock lets you lock the buttons on the control panel so
children cannot accidentally start the dishwasher. To activate
Control Lock, hold the Control Lock button down for three (3)
seconds. To de-activate Control Lock, hold the Control Lock button
down for three (3) seconds again.
Rinse refill
• If the "Rinse refill" indicator is lit, it means the dishwasher is
low on dishwasher rinse aid and requires a refill.
Delay start
• If the "Delay start" indicator is lit, it means, you selected the
"Delay Start" option.
2019-02-12
11:45:21

Publicité

Table des Matières
loading

Table des Matières