Wifi Indicator - Klein Tools ET20 Mode D'emploi

Warning or
Caution
Read
Instructions
DC voltage/
current

WiFi INDICATOR

When turning on the borescope, the WiFi Indicator will illuminate solid green for a few
seconds, then begin to slowly blink when transmitting a WiFi signal. Other behaviors
detailed below:
INDICATOR COLOR
Solid green
Slow-blinking green
Quick-blinking green
BATTERY INDICATOR
During initial power-up of the borescope, the battery light will blink green 3 times. Other
behaviors detailed below:
INDICATOR COLOR
Solid green
Solid red
Slow-blinking green
Slow-blinking red
SYMBOLS ON BACK OF INSTRUMENT
Wear approved
eye protection
Do not probe
moving machinery
WEEE –
Battery disposal
4
Unit is connected to a phone and is active
The device is actively transmitting a WiFi signal, labeled as
"KT Borescope"
The phone initially connected to the borescope is no longer
connected, normally the result of the phone entering
Power-Save mode
5
Battery has more than 20% charge remaining
Battery has 20% charge remaining
Battery is charging, currently at or below 20% charge level
Battery is charging, currently at more than 20% charge level
INDICATORS
STATUS INDICATED
STATUS INDICATED
NOT insulated - Will NOT
protect against electric shock
Conformité Européenne:
Conforms with European
Economic Area directives
Conforms with BCS
regulations of California
Energy Commission
7