Klein Tools ET20 Mode D'emploi page 3

KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
To ensure safe operation and service of the instrument, follow these instructions. Failure
to observe these warnings can result in serious personal injury, fire, or electrical shock.
• The borescope, including the camera end, is NOT insulated. Avoid probing areas where
energized conductive elements may be present. Shut off power to nearby work areas
before starting work.
• Do NOT probe moving machinery that could catch the borescope and/or camera end, and
cause harm to the operator and the Borescope.
• NEVER completely immerse the camera in water or liquids. Do NOT use the borescope for
underwater inspections.
• Avoid probing areas where chemicals may be present.
• NOT intended for use on people or animals.
• Do NOT use near sources of heat.
• Keep steady footing at all times, following ladder safety procedures when necessary.
• Do NOT use if the charging port or housing is damaged in any way.
• No user-serviceable parts inside. Do NOT open or attempt to repair.
• Do NOT expose to direct sunlight, open flame, heat sources, equipment that produces
heat, or extremes of environmental temperature
• The borescope body is NOT waterproof. To keep dust and other foreign items out of the
unit, keep the rubber cover over the charging port when not in use
WARNINGS
NOTE
3