Step 5: Plug Power Adapter Into Vehicle's Power Supply - weBoost DRIVE REACH Guide D'installation

______
Step 5: Plug Power Adapter
Into Vehicle's Power Supply
Plug the power adapter into vehicle's 12V DC power supply.
The Drive Reach will automatically power on when plugged in.
If your Drive Reach is working correctly, the light on the power
adapter will be red, and the light on the booster will be green.
Use only the power supply provided in this package.
NOTE: If the 12V Cigarette Lighter port on your car is always on (even
when your vehicle is turned off) and you will be parking for extended
periods of time (more than a day), we recommend you turn the booster
off by pushing the LED light, which is also a button. This will prevent the
Drive Reach from draining the battery in your vehicle.
DC Power Adapter
weboost.ca 866.294.1660
NEED HELP?
7
DRIVE REACH VEHICLE SIGNAL BOOSTER