Control Panel - Black & Decker Home B6000C Mode D'emploi

cOntROl PAnel

1.5lbs 2. lbs


6




1. Digital Display
Shows the following:
Number for each program setting selection (1 – 11) with
❏
preprogrammed baking time
Crust color (light, Medium or Dark)
❏
loaf size (1.5-lb., 2-lb. or 3-lb.)
❏
Minute-by-minute countdown of remaining time for selected program
❏
. menu Button
Press this button to select the baking cycle you want. A beep sounds each
time you press the button.

. Start/Stop (i/O) Button
Press to begin the cycle and to display the total time for the selected bread
to be completed. To cancel the cycle, press and hold for about 3 seconds
until you hear a beep and the red lED light turns off. The unit beeps to
indicate that it has stopped.
important: Do not press Stop when checking the progress of the bread;
it will cancel the program. Once a cycle is canceled, you will have to start
over again.
. timer Buttons
Press these buttons to set the time for delay bake (up to 13-hour delay).
For example, you can time your bread to be ready for dinner or when you
wake up in the morning. Set it by selecting how much time you want to
pass before the bread is completed. For example, if it is 8:00 p.m. and you
want the bread to be ready at 7:00 a.m., set it for 11 hours.
You can also use these buttons to adjust the time of the cycle. They adjust
up or down in 10-minute increments. Changes must be made before the
unit begins operation.
. crust color Button
lets you choose your preferred crust color: light, Medium or Dark.
6. loaf Size Button
Press to select the loaf size (1.5-lb., 2-lb. or 3-lb.).
7. Red leD indicator light: Start/Stop (I/o) indicator
7