Samson SYNTH SEVEN Manuel Du Propriétaire page 13

Group & Channel Menu
Group & Channel
A
Group
01
Channel
Group Scan
IR Set
Back
From the main performance page, press the MENU/SELECT button to enter the Main Menu.
With GROUP & CHANNEL highlighted, press the MENU/SELECT button to enter the GROUP & CHANNEL sub-
menu.
Setting Group and Channel
Rotate the cursor to select the GROUP parameter.
Press the MENU/SELECT button to adjust the setting.
Rotate the MENU/SELECT knob to adjust the group letter.
Press the MENU/SELECT button to confirm and store the setting or press the POWER button to cancel the
selection and move back to the GROUP & CHANNEL sub-menu.
Rotate the cursor to select the CHANNEL parameter.
Press the MENU/SELECT button to adjust the setting.
Rotate the MENU/SELECT knob to adjust the channel number.
Press the MENU/SELECT button to confirm and store the setting or press the POWER button to cancel the
selection and move back to the GROUP & CHANNEL sub-menu.
Group & Channel
Group
Channel
Group Scan
IR Set
Back
Scan the Group for a clear channel
Rotate the cursor to select the SCAN GROUP parameter.
Press the MENU/SELECT button to activate the scan function.
The display will highlight open channels in green and channels that have interference in red. You can use this
as a gauge when selecting a group for multiple system. By scanning each Group, you can find the Group with
the most number of free channels.
Group & Channel
B
Group
05
Channel
Group Scan
IR Set
Back
Set the transmitter group and channel
Rotate the cursor to select the IR SCAN parameter.
Press the MENU/SELECT button to active the IR SET function. While the IR SET is in progress, position the
transmitter about 6-12" (15-30 cm) from the front of the UR7 receiver with the transmitter's IR window facing
the IR transmitter on the front panel of the receiver.
Group & Channel
B
Group
01
Channel
Group Scan
IR Set
Back
Group Scan
B
A01
01
A02
A03
A04
A05
IR Set IR Set IR Set
Group & Channel
B
Group
01
Channel
Group Scan
IR Set
Back
Group & Channel
A06 Group
A07 Channel
A08 Group Scan
A09 IR Set
A10
IR Set IR Set IR Set
Group & Channel
Group
Channel
Group Scan
IR Set
Back
B
05
Back
IR Set IR Set IR Set
B
02
13