Samson SYNTH SEVEN Manuel Du Propriétaire page 8

UR7 Receiver Callouts
1
1. Antennas Jacks - The BNC antenna jacks allow full rotation for optimum placement. In normal operation,
both antennas should be placed in a vertical position.
2. POWER Switch - Press and hold this to power the receiver on or off. A quick press of the button will move
back through the menus.
3. IR Transmitter - During "IR SET" an infrared code (similar to selecting a channel with a TV remote) is used to
set the transmitter channel.
4. Color LCD - Displays transmitter and receiver settings and performance data.
5. MENU/SELECT Control - This rotary encoder control knob/button is used to control and set menu functions and
parameters.
6
6. DC Input - Connect the supplied power adapter here. WARNING: Do not substitute any other kind of power
adapter. Doing so can cause severe damage to the UR7 and will void your warranty.
7. XLR BALANCED OUTPUT - Electronically balanced, microphone-level output.
8. ¼" UNBALANCED OUTPUT - Unbalanced high impedance instrument-level output.
LCD Display
A. Group
B. Channel
C. Active Antenna Indicator
D. Operating Frequency
E. RF Signal Meter
F. Audio Meter
8
2 3
7 8
G. Transmitter Battery Indicator
H. Receiver Audio Output Level
I. Tone Key Active Indicator
J. High Pass Filter Indicator
K. Receiver Lock
L. Transmitter Mute Indicator
4
Tested To Comply With
FCC Standards
For Home Or O ce Use
D
E
F
5 1
FREQ:
518-546.9MHz
A B C
L K
G
H
I
J