Weekly Timer; Error Information - Mitsubishi Electric PZ-61DR-E Mode D'emploi

Timer, Weekly timer
The settings for Timer and Weekly timer operation can be made from the remote controller.
Press the MENU button to go to the Main menu, and move the cursor to the desired setting
with button F1 or F2 . Refer to the Instruction Book of the remote controller for further
information.
Main Main menu 1/2
Timer

Weekly timer

Restriction
Filter information

Error information

Main display:
Cursor Page
F1 F2 F3 F4
Troubleshooting
Error information
When an error occurs, the following screen will appear.
Check the error status, stop the operation, and consult your dealer.
Error information
Error code
Error unit
M-NET address 1
Model name LGH-100RVX-E
Serial No.
Reset error:Reset button
Page
F1
Error information
Contact information
Dealer
Tel 012-3456-7890
Reset error: Reset button
Page
8
Main Main menu
Timer
Weekly timer
Restriction
Filter information
Error information
Main display:
Cursor Page
F1 F2 F3
1/2
5101
LC ( Lossnay )
01234567
Reset
blinks
F2 F3 F4
2/2
Reset
Timer
1/2
On/Off timer
Operation On/Off times can be set in
5-minute increments.
Auto-Off timer
Auto-Off time can be set to a value from 30
F4
to 240 in 10-minute increments.
Weekly timer
Operation On/Off/Night-purge times for a
week can be set.
Up to eight operation patterns can be set for
each day.
Error code, error unit, M-NET address, unit
model name, and serial number will appear.
The model name and serial number will appear
only if the information have been registered.
Press the F1 or F2 button to go to the next
page.
Contact information (dealer's phone number) will
appear if the information have been registered.