FS DUAL INTEL XEON RS7260 Guide De Démarrage Rapide page 21

Power Supply LEDs
On the rear of the power supply module, an LED displays the status.
• Solid Green: When illuminated, indicates that the power supply is on.
• Blinking Green: When blinking, indicates that the power supply is plugged in and turned off by the
system.
• Blinking Amber: When blinking, indicates that the power supply has a warning condition and
continues to operate.
• Solid Amber: When illuminated, indicates that the power supply is plugged in, and is in an
abnormal state. The system might need service. Please contact technical support.
Changing the Power Supply Module:
PWS-1
PWS1 PWS2
Release Tab
1. Unplug the AC cord from the module to be replaced.
2. On the back of the module, push the release tab sideways, as illustrated.
3. Pull the module out using the handle.
4. Push the new power supply module into the power bay until it clicks. Replace with the same
model.
5. Plug the AC power cord back into the module.
Installing a Full Height or GPU Expansion Card
Riser Card Brackets
Installing Expansion Cards
20