Gilson TRACKMAN Connected Guide Rapide page 3

3
• launch PipettePilot application.
4
• turn the environment sensor on by pressing gently
on the purple side. the leD will blink three times
to indicate that it is on.
When prompted by PipettePilot, connect
the environment sensor to the tablet using
the Bluetooth® connection. Once turned on
and connected, the environment sensor will
automatically begin monitoring temperature,
humidity, and pressure.
to turn off the environment sensor, press and hold
the purple side down for five seconds. the leD will
blink rapidly to indicate that it is turned off.
NOTE
NOTICE
Figure 2
environment sensor
Figure 3
Microplate holder (middle), microplate
adapter (left), and strip adapter (right)
5
• When prompted by PipettePilot, remove the two
white strips from the microplate holder and then
place the microplate holder on the corresponding
frame on the tablet. if needed, use the microplate
adapter or the strip adapter.
6
• Follow PipettePilot instructions.
TRACKMAN® CONNECTED
The environment sensor user manual is
available at
www.bluemaestro.com/tempo-disc-
temperature-humidity-resources/
Pressing the button with excessive force
may damage the device.
|
QUICK GUIDE
3