Heat Controller RG-51L Mode D'emploi page 7

Heat Controller Room Air Conditioner with R-410A
Temperature Control
The temperature control is used to set the desired room temperature
when the unit is being operated in the COOL MODE.
To set the desired room temperature, rotate the temperature dial to the
desired setting. After the set temperature is achieved the thermostat
will automatically start and stop the compressor in order to maintain the
desired set temperature.
Rotate the temperature dial clockwise for higher cooling settings. Higher
cooling settting will provide lower room temperature. Rotate the tem-
perature dial counter clockwise to lower cooling settings. Lower cooling
setings will provide higher room temperature.
Move the lever from side to side until the desired
left/right direction is obtained.
6
Owner's Manual