Safety Precautions - Heat Controller RG-51L Mode D'emploi

Heat Controller

Safety Precautions

To prevent injury to the user or other people and property damage, the following instructions
To prevent injury to the user and propert damage, the following instructions must be
must be followed. Incorrect operation due to ignoring of instructions may cause harm or
followed. Incorrect operation due to ignoring instructions may cause harm or damage.
The seriousness is classified by the following indications.
damage. The seriousness is classified by the following indications.
WARNING
!
!
CAUTION
Meanings of symbols used in this manual are as shown below.
!
Plug in power plug
Plug in power cord
! !
properly.
plug properly
• Otherwise, it may cause electric
Otherwise, it may cause electric
shock or fire due to excess heat
shock or fire due to
generation.
generation
Do not modify power
!
cord length or share
Do not modify power cord
the outlet with other
!
length or share the outlet
appliances.
with other appliances.
• It may cause electric shock or
It may cause electric shock or
fire due to heat generation
fire due to heat generation.
Always ensure effective
Do not operate with
! !
earthing.
wet hands or in a
damp environment
Incorrect earthing may cause
• It may cause electric shock
electric shock.
Unplug the unit if strange
!
Unplug the unit if
sounds, smell, or smoke
!
strange sounds,
comes from it.
odors or smoke
It may cause fire and electric
comes from it.
shock.
• It may cause fire and electric shock Keep firearms away.
!
Do not use a damaged or unspecified power cord
It may cause fire.
• It may cause electric shock or fire
• If the power cord is damaged, it must be replaced by the manufacturer or an
authorized serivce center or a qualified person in order to avoid a hazard
Ventilate room before operating air
!
conditioner if there is a gas leakage from
Do not disassemble or modify unit.
another appliance.
• It may cause failure and electric shock
It may cause explosion, fire and, burns.
Room Air Conditioner with R-410A
This symbol indicates the possibility of death or serious injury.
This symbol indicates the possibility of injury or damage to property.
Never do this.
Always do this.
!
Do not operate or stop the
Do not open the unit
unit by inserting or pulling
during operation
out the power plug.
• It may cause electric shock
It may cause electric shock or fire
excess heat due to heat generation.
Do not operate or stop
the unit by inserting or
pulling out the power
Do not operate with wet
plug
hands or in damp
environment.
• It may cause electric shock or
It may cause electric shock.
fire due to heat generation
Do not allow water to run
Do not use the power
into electric parts.
cord close to heating
appliances
It may cause failure of machine
• It may cause fire and electric shock
or electric shock.
Do not use the socket if it is
Always install circuit
loose or damaged.
!
breaker and a dedicated
power circuit
It may cause fire and electric
shock.
• Incorrect installation may cause
Do not use the power cord
fire and electric shock
close to heating appliances.
It may cause fire and electric
shock.
WARNING
• Incorrect grounding may cause
It may cause electric shock or fire.
If the power cord is damaged, it
must be replaced by the manufac-
turer or an authorised service
centre or a similarly qualified per-
son in order to avoid a hazard.
• It may cause fire and electric shock
This could damage your health.
! !
Incorrect installation may cause
• It may cause failure of machine
fire and electric shock.
It may cause electric shock.
• It may cause fire and electric shock
It may cause an explosion or fire.
Do not disassemble or modify unit.
• It may cause an explosion or fire
It may cause failure and electric shock.
2
2
Do not damage or use an
Always ensure
!
unspecified power cord.
effective grounding
electric shock
Unplug the unit if
!
strange sounds,
odors or smoke
Do not direct airflow at
comes from it.
room occupants only.
Always install circuit
Do not allow water
breaker and a dedicated
to run in to electric
power circuit.
parts
or electric shock
Do not open the unit
Do not use the socket if
during operation.
it is loose or damaged
Do not use the power cord near
flammable gas or combustibles, such
as gasoline, benzene, thinner, etc.
Do not use the power
cord near flammable gas
or combustiblies, such
as gasoline, benzene,
thinner, etc.
Owner's Manual