Using The Device - CAME BPT TH/550 Wi-Fi Manuel D'installation Et D'utilisation

Using the device

Note
The use instructions refer to the device with the temperature shown on the right-hand side of the
display and the time on the left.
To change the display mode, see the section "Inverting the date and time on the display" on page 25.
When first turned on A the programmable thermostat is in automatic heating
ature detected is shown on the display. On the diagram the column corresponding to the current time
flashes and the day of the week is highlighted on a scale from 1 to 7.
NOTE: When the device is in stand-by, the first tap on the screen switches on the backlighting
and does not carry out any command.
Setting the date and time
Touch the clock area A and keep touch-
ing it until the minutes start to flash B.
A
Use the
value and the
time.
Press the
following, using the arrows:
- Minutes
- Hour
B
- Year
- Month
- Day
- Day of the week C
- Format of time displayed (12 hr or 24 hr)
- Enable/disable automatic change to and
from daylight saving time D.
C
mode; the temper-
arrows to set the desired
button to adjust the
button to see and set the