CAME BPT TH/550 Wi-Fi Manuel D'installation Et D'utilisation page 34

Commissioning
To begin using the device, you need:
Name of the Wi-Fi network (SSID)
Level of protection of the router's Wi-Fi network
(WPA/WPA2-PSK, WEP, NOT PROTECTED)
Password to access the Wi-Fi network
Keycode for the programmable thermostat (printed on
the label inside the device body)
Creating a CAMEConnect account
1
Resetting the device
If necessary, lightly press the button
inside the hole shown in figure G; release
the button as soon as the screen darkens
and wait a few seconds before using the
device normally again.
NOTE. This operation does NOT delete any
programming.
G
...................................................
...................................................
...................................................
...................................................
2
To use the application
(THermo), which allows
you to manage the device
from your smartphone or
tablet, you need to create
an account on the CAME-
Connect website.
Enter the following ad-
dress in your browser 1
www.cameconnect.net
and log in 2.