Changing The Dust Bag; Cleaning The Motor Filter - Ayce 1330882-800W Manuel D'utilisation

Caution:
Never operate the vacuum cleaner without the dust bag or the motor
filter, otherwise the device could be damaged.

Changing the dust bag

If the vacuum's suction is reduced, this may be because the bag needs changing.
Lift the floor nozzle off the floor, set the suction force regulation to MAX, switch
on the vacuum cleaner using the on/off button, and look at the bag change indicator.
If it is red, the bag must be changed.
1. Turn off and unplug the vacuum cleaner.
2. Remove the hose, open bag cover by pushing
the latch up with your fingers and lifting bag
cover.
3.Grasp the cardboard at the top of the dust bag
and carefully remove the bag from the vacuum
cleaner.
4 .Put the bag in the bin. Make sure that there are
no holes in it.
5. Insert a new dust bag into the vacuum cleaner.
The vacuum cleaner must never be used without
a dust bag.
6. Close the vacuum cleaner again.
7. Always replace the bag after sucking up large
quantities of fine material such as fine sand,
cement, flour, etc.

Cleaning the motor filter

1. The motor filter can be found in the dust bag container. It protects
the motor from dust and should be cleaned at least twice a year when it is dirty, or if
the suction force is reduced.
2 .Pull the filter holder up out of the vacuum cleaner.
GB
56 57