ETNA CM450ZT Mode D'emploi page 44

OPERATION
EN 18
Attention!
• During the automatic cooking programmes, the microwave function
is switched on. Therefore do not use metal utensils.
• The programmes with a * are preheated. During preheating, the
cooking time pauses and the quick preheat key is on.
• After preheating, you will hear an alarm and the quick preheat key
will blink.
• Put the dish on the glass baking tray, and insert it in the oven on
level 1. Touch the start / pause key.
• The programmes with ** only use the microwave function.
1. Touch the auto menu key to select automatic cooking programmes
(P) or defrost programmes (D).
Time, weight and P01 or d01 appear in the display.
2. Use the selection dial knob to select an automatic cooking
programme.
3. Touch the weight key to set the weight.
The weight flashes in the display.
4. Use the selection dial knob to set the desired weight.
The weight you set depends on the selected programme.
5. Press the start / pause key to start the automatic cooking
programme.
When the cooking program is ready, a signal sounds. The fan continues
to operate for some time and then stops automatically.
If you do not touch the start / pause key, the combi microwave oven
switches itself Off automatically after 15 minutes.