Publicité
Les langues disponibles
Les langues disponibles
6
U-
4.
Insert split pin (M) in hole in PTO shaft, and bend pin legs
around shaft counterclockwise to retain 10 mm nut.
IMPORTANT
Never reuse a split pin - install a new split pin each time a blade is
installed or replaced.
5.
Remove locking tool.
Balance and Adjust Unit
1.
Loosen harness clamp screw.
2.
Put on harness and attach unit to harness.
3.
Slide harness clamp (N) up or down until unit balances with head
approximately 50-75 mm (2 -3 in.) from the ground.
4.
Tighten harness clamp screw.
5.
Loosen upper U-Handle clamp screws (O), and position U-
Handle for comfortable operation.
6.
Tighten U-Handle clamp screws and 8 mm clamp bolt securely.
NOTE
In case of Emergency, the trimmer/brushcutter can be released
from the harness by pulling up on the quick-release collar.
ECHO CONSUMER PRODUCT SUPPORT
If you require assistance or have questions concerning the application,
operation or maintenance of this product you may call the ECHO
Consumer Product Support Department at 1-800-673-1558 from 8:30
am to 4:30 pm (Central Standard Time) Monday through Friday.
Before calling, please know the model and serial number of your unit
to help your Consumer Product Support Representative.
C
HANDLE
OMBO
ECHO, INCORPORATED
400 OAKWOOD ROAD
LAKE ZURICH, IL 60047 USA
PHONE: 1-800-673-1558
www.echo-usa.com
K
I
IT
NSTALLATION
I
NSTRUCTIONS
I
2 0
J
L
N
A
K
M
O
Publicité
