Introduction - Red Sea ReefWave Manuel D'utilisation

Introduction

Congratulations on your purchase of Red Sea's ReefWave
Developed specifically for Red Sea, the ReefWave pumps feature the
unique, patented, Maxspect cross-flow technology and provides a Reef-
Spec water motion that's perfect for corals wherever they are placed in
your aquarium. The combination of an advanced, smooth running and
energy efficient sine-wave motor drive, vibration damping mounts and
dual bearings on all models make ReefWave an especially quiet pulsing
wave pump.
ReefWave is part of Red Sea's suite of smart devices that can be
operated via Wi-Fi by Red Sea's ReefBeat
installed on a smart mobile device with internet connectivity. In addition,
the ReefWave can also be operated directly from its on-board controller.
ReefBeat provides a wide range of easy-to-use functions including
notifications if there is a loss of communication with your ReefWave –
such as in the case of power failure.
ReefBeat is under constant development and over time will
®
include additional connected devices as well as additional aquarium
management tools.
Welcome to Red Sea's smart reef-keeping.
Sincerely,
The Red Sea Team
.
®
app which needs to be
®
Specifications ReefWave
Max Flow Rate 7,500 LPH (1980 GPH)
Power
4w - 25w
Consumption
23cm (9") L x 7cm
Dimension
(2.8") W x 4cm (1.6") H
Recommended 45cm – 120cm
Aquarium size (1.5-4 ft)
Maximum glass
15mm (
5
thickness
Cable Length 3M (10 ft)
Red Sea ReefWave
25 ReefWave 45
® ®
15,000 LPH (3960 GPH)
8w - 45w
31.5cm (12.4") L x 8cm
(3.2") W x 5cm (2") H
60cm – 200cm
(2-6 ft)
/ ") 20mm ( / ")
3
8 4
3M (10 ft)
®
ENG
5