Starting The Appliance - Rowenta HU5115 Mode D'emploi

EN
• Do not allow the area around the appliance to become humid or damp. Should this happen, you
should reduce the humidifying speed or turn the appliance off.
• Never allow absorbent materials such as carpet, curtains, or tablecloths to become humid or damp...
• If the appliance is to be left unattended for a prolonged period of time: it is important to turn it off,
unplug it, empty the water tank and the vaporisation compartment, then clean and allow the appliance
to dry.
• Clean the appliance before and after storage.
• Clean the water tank every 2 days (see M INTEN NCE paragraph).
• W RNING : Micro-organisms can grow in the water tank and be blown in the air when the water tank
is not cleaned regularly and properly (see M INTEN NCE paragraph).

STARTING THE APPLIANCE

Before using the appliance for the first time, check that your mains supply voltage matches that in-
dicated on the appliance.
Your appliance can be operated from an electric socket without an earth contact. It is a class II (dou-
ble insulated ) appliance.
Before switching on your appliance make sure that:
• the appliance is positioned in accordance with these instructions,
• the appliance is on a flat and stable horizontal surface which is not sensitive to humidity and at
least 20cm from any other object,
• the intake grills located under the appliance are totally unobstructed.
How to use your appliance:
1. Lift the water tank, remove the adjustable nozzle (3) and unscrew the anti-scale cartridge holder
stopper (7).
2. Clean the tank (see paragraph on CLE NING) and fill it with cold water (minimum 2 litres / maxi-
mum 5.5 litres).
PLEASE NOTE: We advise you to use slightly hard water so as to avoid the appearance of white
specks of dust; you can use tap water, bottled water, distilled water or boiled water but please re-
member that the tank must always be filled with cold water.
3. Tighten the stopper and check that there are no water leaks.
4. Check that the base of the appliance is clean and that there are no foreign objects.
5. Check that the water level sensor is not obstructed.
6. Reposition the tank on the base.
7. djust the nozzle so that the vapour jet is not directed at an obstacle, which could adversely affect
the humidity regulation.
8. Wait for ten or so minutes for the water to pass through the anti-scale cartridge and fill the vapori-
sation compartment.
9. Plug the appliance in.
10. Turn the appliance on.
20cm 20cm
5,5L
max
13