Brill 2800 MH Mode D'emploi page 26

The product must have been
.
sold to the customer in a legally
correct way.
The original receipt with the
.
GB
customer's address, date of
purchase, model and product
designation is presented as
proof of purchase. The product
must have been purchased
within the EC.
The product was handled prop-
.
erly and according to the rec-
ommendations in the operating
instructions. It is essential that
the product has been main-
tained and cleaned according
to the information in the operat-
ing instructions. No attempt
to disassemble or repair the
product has been made
by either the buyer or an
unauthorised third party.
It must be ensured that only
.
original replacement parts and
original accessories approved
by the manufacturer are used.
There may be an increased risk
of consequential damage and
accidents if non-original parts
or non-original accessories are
used. This warranty does not
cover consequential damages.
The product must be either
.
taken directly or sent with
26
postage paid to an authorised
service centre. The original
receipt must be sent with the
product.
The warranty does not cover
.
damage from misuse, abuse,
use of unsuitable, non-original
or unauthorised interchange-
able parts, replacement parts
or accessories, as well as
improper maintenance and
cleaning.
The products contain various
components that are subject to
normal or use-related wear.
The warranty does not extend
to these wearing parts.
In particular the following com-
ponents relating to this product
are excluded:
Blades / blade bar / drive belt /
care roller / blade roller /
lower blade / cutting plate /
cutting line / cutting head cover /
saw blade / nickel-cadmium-
cell (battery) / brush /
aerator cylinder.
The manufacturer warranty does
not affect existing warranty
claims between the customer and
the dealer / seller.