Environmental Protection; Faultfinding - Brill 2800 MH Mode D'emploi

Environmental protection

GB
should not be deposited in rub-
bish bins but be composted.
Environmental protection,
disposal
(pursuant to RL 2002 / 96 EC)
The packaging material
is made ao recyclable
materials. Dispose of
packaging materials in

Faultfinding

If problems cannot be eliminated
by the measures described here,
the fault must be eliminated by
an authorised workshop.
Motor cannot be switched on!
Check the fuses for the electri-
.
cal power supply to your house.
Check that the upper section 10
.
of the housing is mounted cor-
rectly.
Motor buzzes,
machine does not start!
Cutting mechanism is blocked.
.
Free the blade plate and
chopping chamber of chopped
material.
24
Only shred
during normal
working hours.
Shredder waste
accordance with regulations.
Electrical appliances are not to
be disposed of in the normal
household waste, they must be
professionally disposed of.
Important for Germany:
electrical appliances are to be
disposed of through your local
disposal sites.
Machine starts but blocks at the
lightest load and switches off
with the motor cut-out!
Turn the ON/OFF-switch in
.
O-position and switch on
again.
Always unroll the cable com-
.
pletely from the cable drum.
The cross-section of an exten-
.
sion cable must always be at
least 1,5 mm .
2
Too many consumers connected
.
simultaneously.
Heavy loss of cutting
performance!
Blunt blades (replace blades or
.
use the other, sharp side of the
blades).