Cleaning Or Replacing Canopy Accent Lighting - SOLTRON XXS Serie Instructions De Service

Cleaning and maintenance
32/46
– Remove the cap for the interior lighting: Remove 1 screw.
Replace the lamps: see page 25.
Replace the starter: see page 26.
The assembly is the same process in reverse order.
When assembling the device please note:
– When replacing the lamp covers ensure that the clips are in contact with
the magnets.
– Use the scratch protection.
– Carefully lay the canopy panel in the guide.
4.13 Cleaning or replacing canopy accent
lighting
– Remove the screws.
Replace the lamps: see page 25.
Replace the starter: see page 26.
The assembly is the same process in reverse order.