Cleaning Or Replacing The Uv Lamps In The Base - SOLTRON XXS Serie Instructions De Service

03/2014 1006322-01
4.10 Cleaning or replacing the UV lamps in
the base
– Remove the acrylic glass panel: see page 22.
– Remove the lamp coverings at the head and foot ends.
Replace the lamps: see page 25.
Replace the starter: see page 26.
– Remove the partition and carefully set aside (only for devices with an air
conditioning unit).
The assembly is the same process in reverse order.
When assembling the device please note:
– When positioning the lamp covering push the pins into the opening.
– Carefully lay the acrylic glass panel in the guide.
Cleaning and maintenance
Operating instructions – 29/46