Filter Panels And Lamps; Cleaning Plan - See Operating Instructions Part Ii; Maintenance - SOLTRON XXS Serie Instructions De Service

03/2014 1006322-01
Plastic surfaces
For cleaning the remaining painted and unpainted plastic surfaces, it is best
to simply use warm water and a leather cloth. Never use aggressive cleaning
agents containing alcohol or essential oils. These may lead, in the long run,
to damages not covered by the guarantee.
During cleaning a slight discolouration of the leather cloth by the rubber seals
must be expected for production-related reasons.
Prevent damage to the acrylic glass and plastic surfaces.
– Remove rings, watches, bracelets etc. before starting cleaning work.
4.3.3

Filter panels and lamps

UV low pressure lamps and filter panels can be cleaned with a damp

cloth and without additional cleaning agents where necessary.
UV high pressure lamps can be cleaned with ethyl alcohol where

necessary.
4.4 Cleaning plan – see Operating Instruc-
tions Part II
NOTE:
Cleaning must be confirmed after each tanning session by
pressing the START/STOP button (when the warm-down
time for the main fan has finished).
4.5

Maintenance

Maintenance and care play a major role in deciding the devices performance
and appearance over its useful life. Diligent compliance at the specified inter-
vals is absolutely necessary to ensure the proper operation of your tanning
system.
The current operating hours of the parts requiring maintenance can be dis-
played in the Presetting mode – see separate instructions 'Presettings' (order
no. 1011803-..).
Please note that the device must be inspected regularly by a JK authorized
representative every 12 months (from date of commissioning) to maintain its
proper condition!
Cleaning and maintenance
Operating instructions – 19/46