Assembly And Use; Included In The Pack; Assembly And Start-Up; Opening - Nilox DOC PRO Mode D'emploi

ASSEMBLY AND USE

Upon first use, perform the listed checks and follow the assembly instructions.
You will find DOC PRO pre-assembled in the package.
Simply follow a few instructions to run it.
I
NCLUDED IN THE PACK
DOC PRO
Handlebar
A -
SSEMBLY AND START UP

Opening

Remove the handlebar from the packaging. Make sure the switch is OFF. Pull the lever and raise the
tube to the normal drive position until you hear a click.

Assemble the handlebar

Place the handlebar on the steering column in a central
position. Secure the steering column by tightening it
with the supplied Allen key.

Battery Charge

The electric push scooter battery may not be fully
charged. Insert the five-pole charger in its housing and
connect it to the power mains.
EN
User Manual
Power Supply
6
Instrument kit:
- 5 mm allen key
- Handlebar key