Use And Traffic Rules; Doc Pro Maintenance And Management; Battery Management And Charge - Nilox DOC PRO Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 65
Make sure the brake works correctly and that wheels are duly inflated and with sufficient
thread.
Do not use in dark or dimly lit areas.
Make sure driving speed always permits safe stopping at any time and in any situation.
We recommend you maintain a suitable safety distance from other vehicles when driving.
Use with ice or snow, as well as on rocks, branches or other types of vegetation or with
other objects on the ground that could jeopardise appropriate vehicle control is
prohibited.
Use in flammable environments is strictly prohibited.
Do not climb on or off at high speed, on unpaved roads or slopes.
Do not perform tricks, jumps or other hazardous manoeuvres.
Do not rest any object on the board except your feet.
Do not keep fingers near moving parts to avoid accidents.
Carefully reading this manual is essential for its correct use and to reduce personal injuries.
DOC PRO IS EQUIPPED WITH ELECTRONIC COMPONENTS UNDER ITS BOARD. PLEASE FOLLOW
THE INSTRUCTIONS BELOW TO AVOID DAMAGING THEM:
Do not place metal or sharp objects on the board.
Do not use thinners or solvents to clean push scooter parts.
Do not clean DOC PRO with a pressure cleaning or by submerging it in water; use a damp
cloth to clean plastic parts.
Do not puncture or remove any DOC PRO plastic part.
MAKE SURE THE BATTERY IS FULLY CHARGED BEFORE USE.

USE AND TRAFFIC RULES

IN SOME COUNTRIES DOC PRO MUST BE USED ON PRIVATE GROUNDS ONLY WHERE NORMAL
ROAD SAFETY RULES DO NOT APPLY.
SPECIFICALLY, IN SOME COUNTRIES, STATES OR CITIES, ELECTRIC PUSH SCOOTERS CANNOT
CIRCULATE ON ROADS AND SIDE WALKS.
USERS ARE RESPONSIBLE FOR CHECKING THE SAFETY REGULATIONS APPLICABLE IN THE
COUNTRY WHERE THEY INTEND TO USE THE DOC PRO BEFORE USING IT.

DOC PRO MAINTENANCE AND MANAGEMENT

B
ATTERY MANAGEMENT AND CHARGE
Charge time: about 2.4 hours
Make sure DOC PRO is OFF when charging.
Insert the power cord in the DOC PRO power port and insert the other end in an electrical
socket.
Only use the certified DOC PRO charger.
Do not deform, alter or remove the battery.
Do not charge or leave the battery near heat sources.
Avoid connecting the + and - poles with metallic objects.
Store the battery separately to avoid it coming into contact with metallic materials.
Avoid subjecting the battery to violent hits such as throws or falls.
Charge the battery at room temperature (5-26°C).
EN
10

Publicité

Table des Matières
loading

Table des Matières