Figure 5-24: Confirm New Settings Screen; Figure 5-25: Congratulations Screen - Cisco Systems LINKSYS WAP54G Guide D'installation Rapide

Wireless-G Access Point
5. The Setup Wizard will ask you to review your settings before it saves them. Click the Yes button if you are
satisfied with your settings, or click the No button if you do not want to save your new settings.
6. The Congratulations screen will appear. Click the Online Registration button to register the Access Point, or
click the Exit button to exit the Setup Wizard.
Congratulations! The installation of the Wireless-G Access Point is complete.
If you want to make advanced configuration changes, proceed to "Chapter 6: Configuring the Wireless-G
Chapter 5: Setting up the Wireless-G Access Point
Using the Setup Wizard
Access Point."

Figure 5-24: Confirm New Settings Screen

Figure 5-25: Congratulations Screen

21