Publicité
2
Configuring the Access Point
A
Insert the Setup CD into your
PC's CD-ROM drive. The Setup
Wizard should run
automatically, and the
Welcome screen should
appear. If it does not, click Start
and select Run. Enter
D:\setup.exe (if "D" is the letter
of your PC's CD-ROM drive).
B
On the Welcome screen, click
Click Here to Start.
C
The following screens display
how the Access Point should
be connected during this
Setup Wizard. Optimally, you
should set up the Access Point
using a PC on your wired
network. Click Next.
D
Check the cable connecting
the Access Point to your
network router or switch. Click
Next.
E
Make sure the Access Point is
powered on. Click Next.
B
C
D
E
3
Publicité
Chapitres
Dépannage
