Worx WX820L Mode D'emploi page 5

m) Wipe the battery pack terminals with a clean
dry cloth if they become dirty.
n) Battery pack needs to be charged before use.
Always use the correct charger and refer to
the manufacturer's instructions or equipment
manual for proper charging instructions.
o) Do not leave battery pack on prolonged charge
when not in use.
p) After extended periods of storage, it may
be necessary to charge and discharge the
battery pack several times to obtain maximum
performance.
q) Battery pack gives its best performance when
it is operated at normal room temperature (20
°C ± 5 °C)/ (68 °F ± 9 °F).
r) When disposing of battery packs, keep battery
packs of different electrochemical systems
separate from each other.
s) Recharge only with the charger specified by
WORX. Do not use any charger other than
that specifically provided for use with the
equipment. A charger that is suitable for one type
of battery pack may create a risk of fire when used
with another battery pack.
t) Retain the original product literature for future
reference.
u) Use only the battery pack in the application for
which it was intended.
v) Remove the battery pack from the equipment
when not in use.
w) Dispose of properly.
SYMBOLS
To reduce the risk of injury, user must
read instruction manual
Warning
Wear ear protection
Wear eye protection
Wear dust mask
Make sure the battery is removed
prior to changing accessories.
5-in-1 Multi Sander
Prohibit hands enter before moving
parts stop
Wear protective gloves
Lock
Unlock
Do not burn
Do not expose to rain or water
Li-Ion battery, battery must be
recycled
Hot! Do not touch
POSITEC Inc. has established a partnership with the
RBRC Corporation to recycle any Positec batteries
with the RBRC-call2recycle seal. For environmental
protection, please do not discard batteries in the
trash. After the batteries' life cycle is ended, then
please call 1-800-822-8837 for a free service that will
properly dispose of the battery.
5
EN