Removal Of The Existing Side Rails - bock SR2 Instructions De Montage Et D'utilisation

2.3

Removal of the existing side rails

When removing the existing rails, you must follow the steps for assembly of the side rails
given in the main assembly and use instructions of the nursing care bed in reverse order.
The further disassembly of the fittings is explained here.
Move the nursing bed to the highest posi-
tion for easier dismantling.
The two bars must be removed.
The fitting must also be removed from the
C-guide rail.
Loosen the screw at the bottom of the C-
guide rail, remove the fitting downwards
and put the screw connection back into
place.
Now the C-rail is without fittings and pre-
pared for the further installation of the
hinged side safety catch.
7
EN