1247004‐GB_v1.1
BASIC MODE (Mode1):
Allows programming in multi‐channel mode and individual cancellations.
PROGRAMMING:
The screen displays 001, which indicates the first memory position.
increase or decrease the memory position. Place in the desired position and press the
channel of the transmitter to be programmed. If are kept pressed down for more than
3 seconds, the positions increase or decrease rapidly. If a memory position is taken, this will
be indicated by a dot on the screen.
CANCELLATIONS:
To delete a code, move to the code position and press the C key. The dot indicating a taken
position will disappear. The equipment will emit three short beeps.
To exit the menu, move to the ‐‐‐‐‐ position and press the C key.
If no action is performed, the equipment exits the program automatically after a period of 60
seconds and emits two short beeps.
ADVANCED MODE (Mod2):
Allows the complete management of the unit: programming (F.1), cancellations (F.2), time
configuration (F.3) and relay configuration (F.4).
Function is changed using
Events monitoring (only visible using the programming tool PLO‐200).
F.1 PROGRAMMING
Standard programming (Mr_P) (default option, multi‐channel mode)
The screen displays the first empty memory position in which we can program a code (M001). With
the
keys we can increase or decrease the memory position. If
for more than 3 seconds, the positions increase or decrease rapidly. If a memory position is taken,
this will be indicated by a dot on the screen.
To return to the previous menu, move to the ‐‐‐‐‐ position and press the C key.
If no action is performed, the equipment exits the program automatically after a period of 60
seconds and emits two short beeps.
Special programming (Mr_1 ... Mr34)
Allows selection of the relays that will be activated with the channel programmed from the
transmitter. Example: If you wish to program Channel 1 of the transmitter so that relays 1 and 3
activate, you need to select option Mr13.
The screen displays the first empty memory position in which we can program a code (M001).
Using
, we can increase or decrease the memory position. If
for more than 3 seconds, the positions increase or decrease rapidly. If a memory position is taken,
this will be indicated by a dot on the screen.
To return to the previous menu, move to the ‐‐‐‐‐ position and press the C key. If no action is
performed, the equipment exits the program automatically after a period of 60 seconds and emits
two short beeps.
. To confirm each option, press the C key.
7
are kept pressed down
are kept pressed down