Beurer BM 40 onpack Mode D'emploi page 22

Setting the user memory, date and time
This menu allows you to set the following functions, one after
another.
User memory Date
➔
It is essential to set the date and time. Otherwise, you will not
be able to save your measured values correctly with a date and
time to retrieve them later.
The time is displayed in the 24-hour format.
If you press and hold the function buttons -/+
the values more quickly.
• Press the SET button.
The user memory symbol flashes on the display.
• Select the desired user memory by pressing the
function buttons -/+
You have two memories, each with 60 memory spaces,
to store the measurements of two different people
separately.
• Confirm using the SET button.
Time
➔
-/+, you can set
-/+.
The year flashes on the display.
• Set the year with the function buttons -/+
firm with the SET button.
• Set the month, day, hour and minute and confirm
each setting with the SET button.
When making settings, you can use the START/STOP
button at any time to switch the device off. The set-
tings that have already been performed will be retained.
Operation with the mains part
You can also operate this device with a mains part. However,
before connecting the device with the mains part, please
ensure that you have removed the batteries from the device.
During mains operation, there must not be any batteries in the
battery compartment, as this could damage the device.
• To prevent possible damage to the device, the blood pres-
sure monitor must only be used with the mains part de-
scribed here.
• Furthermore, the mains part must only be connected to the
mains voltage that is specified on the type plate.
• Insert the mains part into the connection provided for this
purpose on the right-hand side of the blood pressure moni-
tor.
• Then insert the mains plug of the mains part into the mains
socket.
• After using the blood pressure monitor, unplug the mains
part from the mains socket first and then disconnect it from
the blood pressure monitor. As soon as you unplug the
22
-/+ and con-