Safety E; Important Safety Instructions; Correct Disposal Of This Product; Safety Compliance - Arcam Solo movie Manuel

safety

Important safety instructions

1. Read these instructions
All the safety and operating instructions should be
read before this product is operated.
2. Keep these instructions
The safety and operating instructions should be
retained for future reference.
3. Heed all warnings
All warnings on the appliance and in the operating
instructions should be adhered to.
4. Follow all instructions
All operating and use instructions should be
followed.
5. Do not use this apparatus near water
The appliance should not be used near water or
moisture – for example, in a wet basement or near a
swimming pool.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer's instructions.
8. Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade or the third prong are
provided for your safety. If the provided plug does
not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the
apparatus.
11. Only use attachments/accessories specified by the
manufacturer.
12. Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid
injury from tip-over.
13. Unplug this apparatus during lightning storms or
when unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
15. Please keep the unit in a well-ventilated
environment.
WARNING: To reduce the risk of fire or electric shock, do not expose
this apparatus to rain, moisture, dripping or splashing. Objects
filled with liquids, such as vases should not be placed on the
apparatus.
WARNING: The mains plug or appliance coupler is used as a
disconnect device, the disconnect device shall remain readily
operable.
This lightning flash with arrowhead symbol within an equilateral
triangle is intended to alert the user to the presence of non-insulated
'dangerous voltage' within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock.
Warning: To reduce the risk of electric shock, do not remove cover
(or back) as there are no user-serviceable parts inside. Refer
servicing to qualified personnel.
The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and maintenance
instructions in the literature accompanying the appliance.
E-4
This equipment is a Class II or double insulated
electrical appliance. It has been designed in
such a way that it does not require a safety
connection to electrical earth.

Correct disposal of this product

This product contains electrical or electronic materials.
The presence of these materials may, if not disposed
of properly, have potential adverse effects on the
environment and human health. Presence of this label
on the product means it should not be disposed of as
unsorted waste and must be collected separately. As
a consumer, you are responsible for ensuring that this
product is disposed of properly.

Safety compliance

This equipment has been designed to meet the IEC/
EN 60065 international electrical safety standard.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
Use of controls or adjustments or performance of
procedures other than those specified herein may
result in hazardous radiation exposure.