Faber e-MatriX 800 Manuel D'utilisation page 10

Installation
Framing the Fireplace
The following instructions are suggested framing
options and are to be used as a guide (2x4 construction
is shown). Please refer to the specifications section for
fireplace dimensions to create custom framing.
!
NOTE: The e-MatriX needs a minimum intake
ventilation of 40 in
2
The intake must allow for air to reach the underside
of the unit.
FEF3226L1 – Framing Option 1
10
(258 cm ) below the fireplace.
2
Intake if no gap is
left between floor
and hearth
www.faberfire.com