Brecknell CS-200M Manuel D'installation page 7

1. Locate the bolt hole (x 4) location on the back of the molded chair.
two bolts for each arm rest
Figure 14. Hole Location and Four Bolts Used for Securing Arm Rest to Chair
2. Secure the arm rests to the molded chair using the four bolts (provided and shown in Figure 14), using
the 5mm allen wrench that's been provided in this packaging.
Figure 15. Secure Arm Rests to the Molded Chair
3. The arm rests are now in position and can be moved up and down.
Figure 16. Arm Rests Are Secured to the Molded Chair Seat
7