Installation Instructions; Correct Installation Position; Assembly Of The Support Base - Gewiss Chorus GW 10 791 Manuel D'installation Et D'emploi

INSTALLATION INSTRUCTIONS

WARNING: the installation of the device must be exclusively done by
qualified personnel, following the regulations in force and the
guidelines for KNX/EIB installations.
In order for the timer-thermostat to
take correct readings of the ambient
temperature, it must not be installed in
an alcove, near a door or window, next
to radiators or air conditioner units and
must not be placed in direct sunlight
or in draughty areas.
The support base should be positioned at 160 cm from the ground and can be mounted
on the wall, using dowels, or on top of a 3-place box.
WARNING : When mounting the support base, make sure you follow the directions
indicated by the arrow
Mounting with dowels

Correct installation position

Assembly of the support base

.
65
U P
E
N
G
L
I
S
H