Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
1. HDD:
HDD is activated
2. HDD FULL: HDD is full
3. ALARM:
alarm is armed (when alarm is triggered, LED is flashing)
4. TIMER:
the device is programmed to record
5. PLAY:
recorded material is being reproduced
6. REC:
the device is recording
7. MENU:
Press MENU and enter the password (default: 0000) to access the main menu.
8. ENTER:
Press ENTER to confirm data or a selection.
9. SEARCH:
Press SEARCH to search a video fragment by recording time.
10. SLOW:
Press SLOW to slow down the play speed.
11. Controls for video playback
: PLAY: to play recorded video.
: STOP: to stop playback.
: PAUSE: to pause the fragment.
: REW: for fast rewind in PLAY mode or to go back to the previous image in PAUSE. Speed
can be adjusted by pressing the REW button several times.
: FF/Right: for fast forward in PLAY mode or to move on to the next image in PAUSE. Speed
can be adjusted by pressing the REW button several times.
12. REC:
Press this button to start recording.
13. POWER:
Press this button to power on, and press again to power off.
c) Back Panel Description
1. POWER: connect the provided adapter to
this connector and plug it into the mains.
2. VIDEO IN: to connect to a video source
such as a quad, a multiplexer or a camera.
3. VIDEO OUT: to connect to a monitor or the
video input of a quad or multiplexer.
4. AUDIO OUT: to connect to a monitor.
5. AUDIO IN: to connect an audio source such as a microphone.
6. External RS232/Alarm in- and output: the device can be controlled remotely by an external device or trigger
mechanism. The connections should be established as follows:
DVR1A
- 5 -
VELLEMAN
Publicité
Table des Matières
