Velleman DVR1A Mode D'emploi page 12

Masquer les pouces Voir aussi pour DVR1A:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

1) Enter Remote Menu
Press the MENU button on the front of the device, enter the
password and confirm it by pressing ENTER (cf. "4a: Open Main
Menu" on p. 7)
Press ▲or ▼until 'Remote' is selected (cf. figure on the right).
Press ENTER to enter the remote menu. A screen as shown on
the right will be displayed.
2) Remote Protocol Mode Set-Up
1. Press ▲or ▼to select 'Remote Mode' and press ENTER.
2. Press ▲or ▼to select the protocol: RS-232 or
3. Press MENU to confirm the current set-up and return to the previous menu.
4. Press MENU again to exit and close the remote menu.
3) Remote Protocol Transmitting Baud Rate Set-Up
1. Press ▲or ▼to select 'Baud Rate' and press ENTER.
2. Press ▲or ▼to set the baud rate: 115200 / 57600 / 19200 / 9600 / 480 / 3600 / 2400 / 1200
3. Press MENU to confirm the current set-up and return to the previous menu.
4. Press MENU again to exit and close the remote menu.
4) Remote Protocol ID Set-Up
You can use the RS232 remote protocol to control more than 1 DVR1A. The ID number can range from 000 to 999.
1. Press ▲or ▼to select 'ID' and press ENTER.
2. Press ▲or ▼to set numerical number and press ◄ or ► to move digit location (3 digits).
3. Press MENU to confirm the current set-up and return to the previous menu.
4. Press MENU again to exit and close the remote menu.
g) Event List
Press the MENU button on the front of the device, enter the
password and confirm it by pressing ENTER (cf. "4a: Open Main
Menu" on p. 7)
Press ▲or ▼until 'Event' is selected (cf. figure on the right).
Press ENTER to see the entire 'list of events'. A screen as
shown on the right will be displayed.
Press ◄ or ►to switch pages (8 events on 1 page) and press
▲or ▼to select the desired event. Press ENTER to play it.
HDD: HDD error time.
VLS:
video loss time.
PWR: recovery time after power shutdown (e.g. power shut down at 01:00 and power recovery at 03.00. The
display indicates that the device restarted at 03:00 after a power shutdown).
DVR1A
RS-485.
- 12 -
(Menu)
Timer
Record
Alarm
► Remote
System
Event
(Remote)
► Remote Mode: RS-232
Baud Rate: 9600
ID: 000
(Menu)
Timer
Record
Alarm
Remote
System
► Event
PWR 2002-JAN-01 03:00:00
VLS 2002-JAN-01 01:02:04
HDD 2002-JAN-01 01:02:03
PWR 2002-JAN-01 01:02:02
VLS 2002-JAN-01 01:02:01
HDD 2002-JAN-01 01:02:00
◄: Page Up ►: Page Down
VELLEMAN

Publicité

Table des Matières
loading

Table des Matières