ZTE -C E520 Guide D'utilisation page 24

Amrc 1x
Masquer les pouces Voir aussi pour ZTE-C E520:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Do not pierce battery with a sharp object such as a needle.
Do not disassemble or modify the battery.
Do not use a damaged or deformed battery.
Do not drop, throw, or subject the handset to rough treatment.
Do not solder the battery directly.
Stop using the battery if abnormal heat, odor, discoloration, deformation, or abnormal
condition is detected during use, charge, or storage.
Remove the battery whose life cycle has expired from equipment immediately.
This equipment is fitted with an internal battery. Take it to a qualified service engineer
when the replacement of the battery is required.
The earpiece may become warm during normal use. Also, the handset itself may be-
come warm while the battery is being charged.
Be careful not to place the handset near heat sources (such as a heater) or too close to
the edge of the table.
Power off your phone before you clean it. Use a damp or anti-static cloth to clean the
handset. Do not use an ordinary dry cloth or electrostatic cloth. Do not use chemical or
abrasive cleaners as these could damage the casing.
Remember to make backup copies of all important data on your handset.
Remember to recycle: the cardboard packing supplied with this handset is ideal for recy-
cling.
4

Publicité

Table des Matières
loading

Table des Matières