Basic Functions; Select Input Source; Navigation In The Main Menu; The Main Menu - Megasat Royal Line II 19 Mode D'emploi

6. Basic Functions

6.1 Select input source

Press the INPUT button on the remote control to select
the input source. Use the / buttons or the buttons
p q
on the TV to select a source. Press OK to confirm, or
wait a few seconds.
Note:
Before you select the source, make sure that the
source is ready, otherwise no signal is transmitted.
6.2 Navigation in Main Menu
Press the MENU button to enter the main
menu. It consists of further submenus:

• Channel

• Image
• Sound
• Clock
• Options
• Lock
Navigate through the individual submenus using the
the respective submenu. Press MENU to go back one step, or press EXIT to exit the menu
completely.
10
keys. Press the OK key to enter
t u
ENGLISH

7. The Main Menu

7.1 Channel
In the menu Channel you can search for new channels, edit channels or set configura-
tions at your reception mode.
Note:
The submenu of Channel Search differ depending on what kind of a reception
mode you have set during the first installation (satellite, cable or terrestrial).

7.1.1 Auto search (Satellite)

Before you start a channel search make sure you are on the correct input source. Press
the INPUT button on the remote control and select „Satellite".
Note: The automatic station search contains the same search functions as with the
first installation (see page 9).
Satellite
Select the desired Satellites for receiving
Channel Type
Choose between all channels or FTA
(free to air only, that are not encrypted)
Service Type
Choose between All, DTV (TV programs)
or Radio (only radio)
Search mode
Choose between standard, Blind search
or network search
Unicable
If you operate your satellite system with
Unicable, you can configure the settings
for the reception here. Check these according to the specifications of the Unicable
system or Unicable LNB.
Search
Press OK to start the auto search.
ENGLISH
11